What Did You Do To Your Roxor This Weekend?

[JB2133]

Finally got the Cecco Farm Bumper on - just need to do the frame tie in!

Went with the red shackles to match the ones on the front stubby.

Did have an interesting development Sunday- was spewing coolant all over the engine bay…turns out the supply line slipped off the plastic connector (the steel clamp was slid down the line about 3”. Unsure if it wasn’t snugged up at the factory, but was able to use vise grips to get it all tight. Then took the pressure washer to clean up the mess.

 

[WW 22 Roxor]

Well I got rear ended by a new f350 in my Roxor. Yea fun so fun. Did more damage to the Ford than the Roxor.
I stopped for a school bus unloading in the lane next to me and as I was slowing down and almost stopped I heard my what I thought was my brakes locking up. No it was the guy in the Ford behind with his brakes locked up. Wham! He hits me and pushed me ahead about 5 feet or so.
He apologized and gave me his insurance info. So the next day I called his insurance and they were expecting my call. I found the tailgate and latch on eBay for under 300 dollars. I called my body shop that I use and I buy the parts and they do the work and reimburse me for the parts. Looks like just a tailgate and latch system and some small body work.
I think the spare tire took the hit the most and cushioned the rest.
The guy that hit me his was beat up pretty good but no metal damage just all the plastic parts... grill bumper.

 

[DDP70]

Mile Marker hubs. Surprisingly easy except for the stupid dust cap removal.

View attachment 14392

Mine were tough to get off as well. Thought I could take them off and save them. I was wrong. They were mangled by the time I got them off.

 

[SteveinUT]

And now with the grill cover on...

 

[Colderweather86]

Finally got the Cecco Farm Bumper on - just need to do the frame tie in!

Went with the red shackles to match the ones on the front stubby.

Did have an interesting development Sunday- was spewing coolant all over the engine bay…turns out the supply line slipped off the plastic connector (the steel clamp was slid down the line about 3”. Unsure if it wasn’t snugged up at the factory, but was able to use vise grips to get it all tight. Then took the pressure washer to clean up the mess.

I still haven't done the frame tie in. It's been 4 years now, and I've been yanked out backwards of the snow and mud, towed my car hauler trailer around the yard, pulled a lot of stuff out the ice with 4wd clutch dumps.

 

[JB2133]

Finished the lighting and snagged a decent soundbar on BF. Footwell lights are on the button switch between the indicator arrows. Excited to not see wiring and crimp connectors for a while!

Sent from my iPhone using Tapatalk