What Did You Do To Your Roxor This Weekend?

[Colderweather86]

I picked up my 2020 Roxor today. Put 2 miles on it before I put it on a 2 post lift and checked every nut and bolt, as well as all the running gear fluids. Went through the wiring diagram and found that it's pre wired for a light bar, and spot lights.

 

[Roxasuras]

I picked up my 2020 Roxor today. Put 2 miles on it before I put it on a 2 post lift and checked every nut and bolt, as well as all the running gear fluids. Went through the wiring diagram and found that it's pre wired for a light bar, and spot lights.

Congrats. It should also be premiered for turn signals.

 

[GPG]

you guys where did you find the wiring diagram for a 2020 I guess I have a new one as well and wanted to put turn signals on it but waiting for XTC to get caught up

 

[BDRAG]

you guys where did you find the wiring diagram for a 2020 I guess I have a new one as well and wanted to put turn signals on it but waiting for XTC to get caught up

On my 2018, we just ran our own harness up front to my LED front indicators and we tied into the harness just outside the tail light. Now I can not remember if the bulb was already in the socket or not. Still working. I think I just pulled power of ignition /accessory. I used the big ole Signal Stat unit that I first saw a long time ago on my brothers 1952 International pick up. Lol. The attach clamp around the steering column needs to be cut to length and is a *itch for us non elastic old folk. Lol. Good luck.

BDRAG

 

[GPG]

Hey thanks for the reply I thought the XTC kit was going to be pretty slick but it's still on backorder so kind of looking at other options.

 

[BDRAG]

Hey thanks for the reply I thought the XTC kit was going to be pretty slick but it's still on backorder so kind of looking at other options.

I bought my kit from side x side stuff. Not the XTC Kit but the one they call item# 104-Roxor. Brand EZTSK. It NOT self canceling but who cares?
It came with the small led lights for the front. I think I chunked most of the kit. Lol. I mounted the signal stalk down a ways from steering wheel to keep it out of the was for flinging hands and arm when playing hard. No need for dash lights because the unit on column has lights built in.

You can prolly save some money buying the signal stat from Napa. Looking on line the signal stat 900 is about $50. Piece part it. All you need is the relay to make it blink and the stalk and some wiring stuff. I think I used some old trailer 4wire I had laying around.

BDRAG

 

[Colderweather86]

I asked the "mechanic" at the dealer if he could hook me up with the schematic, and he printed the whole section out for me. I will scan it at work tomorrow and try to upload it here. There's about 20 pages front and back.

 

[Max A.]

I asked the "mechanic" at the dealer if he could hook me up with the schematic, and he printed the whole section out for me. I will scan it at work tomorrow and try to upload it here. There's about 20 pages front and back.

Please also email it to me climaxoffroad@gmail.com


Sent from my iPad using Tapatalk

 

[BDRAG]

I asked the "mechanic" at the dealer if he could hook me up with the schematic, and he printed the whole section out for me. I will scan it at work tomorrow and try to upload it here. There's about 20 pages front and back.

That old school Signal Stat 900 has a generic wiring diagram in images on Google. The only possible snag would be wether or not you use led turn bulbs in front or standard. It may require a different relay.

BDRAG

 

[Colderweather86]

Please also email it to me climaxoffroad@gmail.com


Sent from my iPad using Tapatalk

Got it ?

 

[GPG]

Hey thanks 86 can you send it off to me too? greatplainsgordy@gmail.com

 

[Vinny]

Drove up Mingus Mountain overlooking the Verde Valley, AZ

 

[Siriustock]

My son and I got all the fluids topped off. Air filter changed, oil changed and got my KC lights wired. Now just need to get them adjusted.

 

[wpatter]

Winch went on today. Still have a little bit to do. I am planning on replacing the bumper at some point but will have to cut the factory bumper to make it fit with the setup I currently have. I'd like a Ceeco but will have to wait for a month or two as I've already blown my monthly budget for August.

 

[Collin S.]

I installed my folding windshield from Dirt Warrior which in my opinion is by far the best design out there and the best price. It comes with the glass for less cost than those without Their customer service is amazing too. I also installed CJ style windshield tie down hardware.

 

[Roxasuras]

I installed my folding windshield from Dirt Warrior which in my opinion is by far the best design out there and the best price. It comes with the glass for less cost than those without Their customer service is amazing too. I also installed CJ style windshield tie down hardware.

View attachment 7275 View attachment 7276

What did the windshield cost?

 

[wpatter]

What did the windshield cost?

Looks to be $600 on their website.

 

[Roxasuras]

Looks to be $600 on their website.

Thank you! Sounds pretty reasonable.

 

[Collin S.]

What did the windshield cost?

It was $650 with shipping. Use the Roxernation15 code for 15% off. Yes, Roxor is spelled wrong in the code lol.

 

[Cheech]

Took a ride to St Augustine along the beach. Windy and the water was choppy but a nice ride. Everyone I ran into loved the Roxor

.