What Did You Do To Your Roxor This Weekend?

Almost finished my swing gate, and got it mounted. Then I cleaned my garage and behind my garage. Filled my 8x14 utility trailer all the way to the top of its 4' sides with clutter.

20201010_165818.jpg
 
I have though about re-purposing my front hoop and runners. Minor trimming, notching and some welding. But I think it may work out once I get back home. I'd feel better about the extra roll over protection for the kids in the back.

20201011_115821.jpg 20201011_115815.jpg 20201011_115824.jpg
 
Tore up some trails, drove through a creek, went to dairy queen with my grandma, installed 1.5" lift shackles on the front (almost lost a finger because it's my first time playing with leaf springs) installed egr plates but left the cooler and coolant lines as is; tossed the valve and said hello to the Ford light, deleted the particulate filter/catalyst, got stuck on a rock, took the dog to get some attention from some women at the gas station, drove through the creek again, hit a tree...

Typical Sunday stuff

20201107_203447.jpg
20201107_203532.jpg
20201108_125122.jpg


20201107_203447.jpg 20201107_203532.jpg 20201108_125122.jpg
 
Cloud said:
Tore up some trails, drove through a creek, went to dairy queen with my grandma, installed 1.5" lift shackles on the front (almost lost a finger because it's my first time playing with leaf springs) installed egr plates but left the cooler and coolant lines as is; tossed the valve and said hello to the Ford light, deleted the particulate filter/catalyst, got stuck on a rock, took the dog to get some attention from some women at the gas station, drove through the creek again, hit a tree...

Typical Sunday stuff
Click to expand...
Shackles look good. I’d definitely suggest throwing on some paint. Black or green would look good.
 
Cloud said:
Tore up some trails, drove through a creek, went to dairy queen with my grandma, installed 1.5" lift shackles on the front (almost lost a finger because it's my first time playing with leaf springs) installed egr plates but left the cooler and coolant lines as is; tossed the valve and said hello to the Ford light, deleted the particulate filter/catalyst, got stuck on a rock, took the dog to get some attention from some women at the gas station, drove through the creek again, hit a tree...

Typical Sunday stuff

View attachment 8031View attachment 8032View attachment 8033

View attachment 8031 View attachment 8032 View attachment 8033
Click to expand...
Wow, busy wknd. We just got hammered with snow.

1108201351_HDR.jpg
 
Max A. said:
Shackles look good. I’d definitely suggest throwing on some paint. Black or green would look good.
Click to expand...
Well I just learned I can get things powder coated for free...

Also got a crazy idea for a cast iron front bumper today as I passed the Hi-Lift Jack factory on my way to dairy queen
 
Welded up and installed Max's Max Travel suspension. Taking a break while my buddy welds the DOM sleeves in the frame holes I just drilled. After it's done, I'm gonna drive home in the freezing rain with no wipers

20201108_140219.jpg

20201108_140219.jpg
 
Last edited:
Drove home in the freezing rain with no wipers or heat. It was cold. Steering wheel is way off now. The top of the wheel is sitting at 3 o'clock now.
 
Cloud said:
Tore up some trails, drove through a creek, went to dairy queen with my grandma, installed 1.5" lift shackles on the front (almost lost a finger because it's my first time playing with leaf springs) installed egr plates but left the cooler and coolant lines as is; tossed the valve and said hello to the Ford light, deleted the particulate filter/catalyst, got stuck on a rock, took the dog to get some attention from some women at the gas station, drove through the creek again, hit a tree...

Typical Sunday stuff

View attachment 8031View attachment 8032View attachment 8033

View attachment 8031 View attachment 8032 View attachment 8033
Click to expand...
Why did you take the exhaust apart?
 
Colderweather86 said:
Drove home in the freezing rain with no wipers or heat. It was cold. Steering wheel is way off now. The top of the wheel is sitting at 3 o'clock now.
Click to expand...

With any lift you will need to spin your drag link out a few turns to correct the wheel.


Sent from my iPad using Tapatalk
 
Last edited:
Colderweather86 said:
Daylight photo

View attachment 8050
Click to expand...

Looks great! Thanks for purchasing the very first kit! All 5 from the first batch have sold. I will be making more.

Eager to hear how much you love the new set up. It’s a huge change in ride quality.


Sent from my iPad using Tapatalk
 
I added a Fortress top. Had no idea it would be so heavy duty. Ready for an asteroid now.
I also added a steel braided line to my oil gauge. Wow what a complicated matter that simple task turned into. Had to drop the exhaust system after the turbo back.

78181094-B80C-407E-BD79-0F93699EDA82.jpeg 5005BDA3-4CCB-47FA-9F17-7D573065319D.jpeg
 
Togo said:
I added a Fortress top. Had no idea it would be so heavy duty. Ready for an asteroid now.
I also added a steel braided line to my oil gauge. Wow what a complicated matter that simple task turned into. Had to drop the exhaust system after the turbo back.

View attachment 8057 View attachment 8058
Click to expand...
What happened to your data plates? Rain?
 
You must log in or register to reply here.

Similar threads

Vinny
What's your diesel cost in your area?
2 3
Replies
47
Views
6K
USMC
USMC
Sasquatch
OFFICIAL: What did you do to your Roxor today?
8 9 10
Replies
188
Views
46K
txroadkill
txroadkill
B
Tell Us About Your ROXOR Journey
Replies
15
Views
3K
Bob R1
B
M
How to Maintain Your Mahindra SUV for Long-Term Performance
Replies
1
Views
1K
Colderweather86
Colderweather86
W
What to do when engine blows up?
2
Replies
39
Views
11K
dieselfreak
D
Back
Top