Transfer Case Video

Joined
Feb 8, 2023
Messages
69
Points
18
Location
Billings Montana
Roxor Ownership
Roxor Owner
I posted a transfer case rebuild video on youtube, TK2034 overhaul kit has everything you need except gears/shafts/housings and bolts/washers. It's in 4k, check it out!



Idler shaft and gear are the most common things I've replaced, usually everything else will live unless the idler takes a huge dive. These are also on mining equipment, the regular user shouldn't see too much failure unless they run water in the oil for too long...

My kit has pretty good bearings, but future upgrades such as cryotreat are in the works.

Tools will be available soon, I used 3d printed prototypes in this video and they all worked. Real tools are a few weeks (ish) out.
 

ADEggman

New member
Joined
Oct 6, 2025
Messages
11
Points
3
Location
Agua Dulce , CA
Roxor Ownership
Roxor Owner
Thank you for posting this. I'm getting ready to tear mine apart to do a twin stick conversion. This helps a lot.
 

ADEggman

New member
Joined
Oct 6, 2025
Messages
11
Points
3
Location
Agua Dulce , CA
Roxor Ownership
Roxor Owner
Waiting for my kit from Kaiser Willys.It was just over $350.00 and uses factory parts. I think it's the same kit that Longslyde used. It will require removal and teardown of the transfer case but that's a one day deal at most. I'd really like to put in lower gears but from everything I'm reading it's not an option.
 
Top