Drag bar twisting while turning. Normal?

[txroadkill]

Ok, so just smack the silver (about quarter size) end of the ball jont?
I will try that this evning. Appreciate it!

No. Hit the sides. By sides I mean 90 degrees from castle nut.

 

[txroadkill]

hit it on the red line. Can also hit it from the bottom swinging up in the same spot.

 

[txroadkill]

It worked! Thanks again.

Same trick works for all the joints on the steering linkage.

 

[Joxor889]

Good morning,

I have this clunking noise every time I turn right or left and found that the rear mounts for the front leaf springs are creating the noise. As it snaps against the mount that is welded to the frame. not sure how to remedy this?

Mine also had the exact problem. Tightening the bolt worked for me.

 

[Uncle Chuck]

Put it on mine and can verify it does work. The Cure! for Jeep (CJ, YJ, TJ & XJ)

Hey TX!
So you installed "the cure" a couple of years ago now? Is it still working? Did the popping sound actually go away?
Thanks!

 

[txroadkill]

Hey TX!
So you installed "the cure" a couple of years ago now? Is it still working? Did the popping sound actually go away?
Thanks!

Went away then I swapped to the OTR steering and was good for awhile. then that setup also started making noise so I pulled the cure off the factory linkage and put it on my OTR steering and it cured that setup as well.