The switch blanks on the dash

[billyg]

Hi I would like some information on the wiring harness that is plugged into a blank on the dash. It is marked as tail light. Is it live or wired for future turn signals? I have not done digging into this yet just wanted a heads up. Is their a wiring diagram for the roxor? Thanks

 

[billyg]

Thank you

 

[Woodsman74881]

Some of the blanks were pre wired for light bar. Blue Tooth speaker bar etc.

 

[billyg]

Thanks for the info. Those blanks are the hardest thinks to remove!

 

[Harry]

Thanks for the info. Those blanks are the hardest thinks to remove!

 

[OsageSky]

For anyone interested in adding work lighting...if you do not want to cut into the factory wiring that is very conveniently existing, the switch format that is used (at least on my 22) is an Eaton SVR rocker.

https://www.waytekwire.com/search?query=eaton%20svr

the switch is absolutely plug-and-play.

 

[Barnboy]

For anyone interested in adding work lighting...if you do not want to cut into the factory wiring that is very conveniently existing, the switch format that is used (at least on my 22) is an Eaton SVR rocker.

https://www.waytekwire.com/search?query=eaton%20svr

the switch is absolutely plug-and-play.

I used the factory wiring too. I researched the switches and Molex 150 plugs. Doesn't seem to be much interest in using the sealed wiring system. I prefer to keep things stock as much as possible.

 

[Bob R1]

While looking around under the dash of my 2024 HD Base I discovered a Couple of the Blank Covers that had a plug attached on the back.
Bottom Row Center Blank Cover
Bottom Row Right Blank Cover.
I took a look at a new 2024 All Weather. The Bottom Center was for the Wiper Switch. The Bottom Right was for the Light Bar Switch.

Bob R

 

[lost1wing]

While looking around under the dash of my 2024 HD Base I discovered a Couple of the Blank Covers that had a plug attached on the back.
Bottom Row Center Blank Cover
Bottom Row Right Blank Cover.
I took a look at a new 2024 All Weather. The Bottom Center was for the Wiper Switch. The Bottom Right was for the Light Bar Switch.

Bob R

My 2023 had three blanks with wires going to them. Lightbar, soundbar, and wiper wash reservoir pump. I used the lightbar and the soundbar circuits by adding the switches and a fuse in the Roxpower center at the left kick panel.