The switch blanks on the dash

[billyg]

Hi I would like some information on the wiring harness that is plugged into a blank on the dash. It is marked as tail light. Is it live or wired for future turn signals? I have not done digging into this yet just wanted a heads up. Is their a wiring diagram for the roxor? Thanks

 

[AZROX]

There is a wiring manual. It is almost 17MB and too large to attach. There is also a repair manual that is about 330MB.

Search this forum for "wiring manual" and "repair manual". I know I got both these from some link on this forum.

 

[AZROX]

WM453 posted the links last year in August.

 

[billyg]

Thank you

 

[Woodsman74881]

Some of the blanks were pre wired for light bar. Blue Tooth speaker bar etc.

 

[billyg]

Thanks for the info. Those blanks are the hardest thinks to remove!

 

[Harry]

Thanks for the info. Those blanks are the hardest thinks to remove!

 

[OsageSky]

For anyone interested in adding work lighting...if you do not want to cut into the factory wiring that is very conveniently existing, the switch format that is used (at least on my 22) is an Eaton SVR rocker.

https://www.waytekwire.com/search?query=eaton%20svr

the switch is absolutely plug-and-play.

 

[Barnboy]

For anyone interested in adding work lighting...if you do not want to cut into the factory wiring that is very conveniently existing, the switch format that is used (at least on my 22) is an Eaton SVR rocker.

https://www.waytekwire.com/search?query=eaton%20svr

the switch is absolutely plug-and-play.

I used the factory wiring too. I researched the switches and Molex 150 plugs. Doesn't seem to be much interest in using the sealed wiring system. I prefer to keep things stock as much as possible.