BoxRox
Active member
Here’s a rear liner for 08 to 17 Wrangler. It’s chopped to fit just need to cover one hole yet. Used driver’s side on passenger side. Think two bolts through fender well will be sufficient to keep it in place.
Nice. I made a set myself last year. I wanted a set like you have. Post part number and brand please. It looks like a rearward extension still needs to be added to keep mud out or rear fender areas behind liner. I made mine all one piece. Not the best job, more temporary. I like yours.Here’s a rear liner for 08 to 17 Wrangler. It’s chopped to fit just need to cover one hole yet. Used driver’s side on passenger side. Think two bolts through fender well will be sufficient to keep it in place.View attachment 4805
I found them on Parts Geek. OEM/replace 2008 to 2017 Wrangler. They’re not perfect but if you’re real careful measuring, they literally snap into place.
Here’s a rear liner for 08 to 17 Wrangler. It’s chopped to fit just need to cover one hole yet. Used driver’s side on passenger side. Think two bolts through fender well will be sufficient to keep it in place.View attachment 4805
When I made mine, I picked up 2 of those threaded fasteners already in the wheel well. What did you tie yours in with?
BDRAG
I went directly through fender box with 2- 1/4” SS bolts with fender washer. LOL- the shipping cost!!
When you get them, you’ll need to chop off top center bulge and cover/rivet with drop off from end trim. The other 2 bulges can remain; just make a vertical cut so they can insert into well.
You’ll need to trim a bit at top center where fender meets inner fender as there is no clearance for plastic to slide in
Did you use the passengers side for the drivers side also?Here’s a rear liner for 08 to 17 Wrangler. It’s chopped to fit just need to cover one hole yet. Used driver’s side on passenger side. Think two bolts through fender well will be sufficient to keep it in place.View attachment 4805
Did you use the passengers side for the drivers side also?
Hi....so to do this i need 2 wrangler right side liners?
Hi....so to do this i need 2 wrangler right side liners?