Any News on Lift Kits

[BigBob]

I was just checking to see if anyone has heard anything about anyone coming out with lift kits for the Roxor or if anyone has tried a Jeep lift kit yet?

 

[on_the_rox]

We have a 2.5" shackle reversal kit for the front, to level out the Roxor! I will attach some photos. We are also working with a leaf spring manufacturer to possibly build some 2.5" inch and 4" lift springs if there is enough interest. Down the road, we will offer a 4 link kit as well!

 

[BigBob]

I am definitely interested! If you need a guinea pig for your lifts when I get my Roxor I will gladly be a test dummy! Lol

 

[BigBob]

Also what size tires would you be able to clear with a 4 inch lift? I know on a cj7 4 inch lift is recommended 33s not sure about the Roxor though

 

[jrobz23]

I bet with a couple inches just on front, you'd clear 32-33s pretty nice.

 

[on_the_rox]

You can clear 33 inch tall tires on the stock wheels with very minimal rubbing at full lock with just our Front bumper. If wheels are swapped out for ones that have the correct backspacing, you will not rub at all. Our 2.5" lift kit levels the Roxor, and the 33 inch tall tires look much better over stock.

 

[on_the_rox]

Here is a few pictures of that Shackle Reversal Kit. The black Roxor has the 2.5" leveling kit up front, next to our red Roxor on stock suspension, and stock tires.

 

[BigBob]

So you can clear 33s at stock height? Also do you know what wheels you could get that would fix the rubbing? I’m from Louisiana and we have a lot of mud parks around here I’m just trying to get a set up that I can cruise and play a little bit and not have to worry about the transfer case skid plate hitting the ground.

 

[on_the_rox]

It mostly depends on what size of tire you are using. Our 33 inch tall tire is about 9 inches wide, and only one rubs on one leaf spring. Only because we have not aligned it since our lift kit install so one side is able to turn a little bit farther than the other. If you would like a little more room, a wheel with 3"-3 1/2" backspacing should be used. A tire shop would be able to help you measure exactly what you have in mind to verify it will work, but our shackle reversal kit, and front bumper give you a lot more room to use.

 

[motozoo1]

We have a leaf spring add a leaf up front I can ship. We fit 33x10 with spacers no problem we did cut our fenders to get articulation. 150.00 for the add a leaf in front. Attached are all the costs of everything else we have done, windshield is 1000.00 but very sturdy and all glass. Message me for more details.

 

[Bfree]

I live close to SkyJacker Lifts (Monroe, LA.) and so I stopped by there last week to ask about lift options and if they had one that would fit the Roxor. They had never even heard of the Roxor much less tried to put a lift on it. They were getting ready for the SEMA show at the end of October and said that they would be glad to look at the Roxor after that in November to see if can be retro fitted with what they already make or if there needs to be some mods to them and even build one from scratch if need be. I said I should have mine by then and offered it up as a guinea pig. They said great will look forward to doing a build out in Nov. So stay tuned.!!!!!!

 

[Doshounds]

Got my Lift done from On The Rox. Drove it around town today and it rides awesome. No bump steer, smooth ride and I haven't aligned it yet. The parts are extremely tight, which is a good thing. The last thing you want is loose fitting components on your front suspension. It was a lot of work but it was worth it after getting it done. There is a little rise in the front but it leaves room to add a winch with no sag.

 

[Shortbus]

The shackle reversal looks good so let us know what you think about it as there are pros and cons to it. I have been looking on this Lift also so I have a couple of questions like what does it do on the front end components? does anything look like it’s in a bind?how big are your tires? Is that the windshield and top from On The Rox ? I talked to Wyatt yesterday and they are coming out with a fold down windshield that looks awesome, he supposed to put some pictures up on our site.

 

[Doshounds]

There is zero binding. My tires are 265/75/16. 32” approximately. The install is not an easy bolt on affair due to Mahindras manufacturing tolerances. Expect to use your die grinder. Everything fits right and tight which means your Roxor will drive like it is supposed to. Both the front and rear are dropped equal amounts so your Caster will remain to factory specs.

 

[Shortbus]

Looks awesome as I too don’t want to lift it too high and screw up the center of gravity. Love the look of the tires I may go to 33’s when I get the cash in hand.

 

[Bfree]

Looks great! What brand of tire is that?

 

[Doshounds]

Looks great! What brand of tire is that?

Thanks. It is the Falken Wildpeak AT3

 

[Wesmertz]

Got my Lift done from On The Rox. Drove it around town today and it rides awesome. No bump steer, smooth ride and I haven't aligned it yet. The parts are extremely tight, which is a good thing. The last thing you want is loose fitting components on your front suspension. It was a lot of work but it was worth it after getting it done. There is a little rise in the front but it leaves room to add a winch with no sag.

View attachment 1465

How is the long term review on the Reverse shackle kit? How would you rate the ride quality with the shackles on the back?