Latest activity

Most switches are 1/8 NPT, so you will need an adapter. OE switch is M10x1.0. I have a T in mine for a real oil pressure gauge. But you...

Can you back one onto a tow buddy/dolly , with Warn Hubbs , No problem ???

Thanks..... is there a certain part number for the oil pressure switch

I believe the new roxors are all HD models. Stiffer rear springs.

Good to hear it's working now. As for the oil pressure switch, get an AC Delco switch. The Mahindra switch is poor quality. It doesn't...

upgraded to 90 amp..... got it going charged the battery all night full charge checked with meter this morning was charging 15 - 16- 17...

Why did you replace the old Alternator?

Hey all, Love the Roxor. One thing that bummed me out a bit was it was only 2 passenger. Honestly, I do not think I would have rear...

What is your tow vehicle ?

Somewhat depends on the tow vehicle And Driveshaft status The owners manual says 55mph max I try to stay under 60mph with the...

I went the easy route and had them installed when the shop did my gears. But I’d venture to say that a hub install could be done after...

Used these instructions to install the Mile Marker Hubs. Hardest part was removing the dust cover.

You’ll lose your mind if you try to think about it too much. None of it makes sense mechanically so it’s best just to ignore it. The few...

That makes perfect sense. I do not see myself needing to go faster than 65 since I am extremely retired and have nowhere to be at any...

In case others have the same issue...a few months back I posted on the warn hub install thread about an issue I had while trying to flat...