Realtywill
Member
- Joined
- Jan 29, 2019
- Messages
- 61
- Points
- 18
- Location
- Folsom, CA, USA
- Roxor Ownership
- Roxor Owner
- Roxor #
- 6020
I might be the only one thinking this way. My goal is almost anything I change on my Roxor can be removed bringing the Roxor back to original as possible (I probably won’t ever do this, I just want the option). My second goal is to purchase as many factory parts as possible and use those before any aftermarket parts (budget permitting).
If anybody has any other suggestions on what upgrades to do to achieve this would be great. Like I said, I might be the only one thinking this way but thought I’d ask.
So far I’ve ordered the factory winch plate, factory black front grille, two factory passenger seat belts, factory light bar wiring harness, factory side steps, and factory rear tow hitch.
Aftermarket smittybilt gen 2 -9500 winch, XTC turn signal kit, trailer wiring harness that hooks directly to the XTC turn signal kit, UTVMA bolt to factory back roll bar, side mirrors, lighted license plate bracket to spare tire, two locking ammo cans, smittybilt back seat that I had trimmed down (I couldn’t find a seat that fit perfectly so I got the longer one and modified it), fire extinguisher mount from Amazon, roll bar clamps for rear seat belts. I also ordered the Rough Country leveling kit but only used the longer front shackles (I decided I didn’t want to drill into my frame).
I have a pair of front floor mats on order, aftermarket light bar, and lap belt for the center of the back seat.
My thinking is to drill as few times into my Roxor. For example I’d like a custom center console that uses the same bolts as the front seat belts. This is my thinking and wondering if anybody has any other suggestions or if there are any fabricators out there that are willing to make parts that use factory bolt points, etc.
Sent from my iPhone using Tapatalk
If anybody has any other suggestions on what upgrades to do to achieve this would be great. Like I said, I might be the only one thinking this way but thought I’d ask.
So far I’ve ordered the factory winch plate, factory black front grille, two factory passenger seat belts, factory light bar wiring harness, factory side steps, and factory rear tow hitch.
Aftermarket smittybilt gen 2 -9500 winch, XTC turn signal kit, trailer wiring harness that hooks directly to the XTC turn signal kit, UTVMA bolt to factory back roll bar, side mirrors, lighted license plate bracket to spare tire, two locking ammo cans, smittybilt back seat that I had trimmed down (I couldn’t find a seat that fit perfectly so I got the longer one and modified it), fire extinguisher mount from Amazon, roll bar clamps for rear seat belts. I also ordered the Rough Country leveling kit but only used the longer front shackles (I decided I didn’t want to drill into my frame).
I have a pair of front floor mats on order, aftermarket light bar, and lap belt for the center of the back seat.
My thinking is to drill as few times into my Roxor. For example I’d like a custom center console that uses the same bolts as the front seat belts. This is my thinking and wondering if anybody has any other suggestions or if there are any fabricators out there that are willing to make parts that use factory bolt points, etc.
Sent from my iPhone using Tapatalk