Stuck in low, help

[Roxor76028]

Recently purchased a 2018 Roxor with 250 miles on it. Previous owner never used low range. While test driving noticed it would slip easy into 4 High, but 4 Low was near impossible. Did eventually get it into 4x4 low & back out but it was extremely hard.

Once home, read the forums & found this is normal so figured I'd work it a bit. Shifted into 4x4 Low now its stuck. Won't shift out. Tried all the tips & tricks; clutch out , rolling forward, rolling backwards on slight incline, etc. Any ideas?

Much thanks in advanced.

 

[Roxasuras]

Try pushing it down and then up. It should eventually go. Natural and letting it roll to a settle position usually does it.

 

[SMF]

Try pushing it down and then up. It should eventually go. Natural and letting it roll to a settle position usually does it.

Sometimes backing up in gear for ten feet of so helps and then trying what Roxasuras says.

 

[Roxor76028]

UPDATE

4' prybar & mallet later it's unstuck. Found the outer "low" sector shaft had surface rust. Used emory cloth, cleaned & lubed. Shifting fairly easy now.

Thanks for the responses.

 

[Roxasuras]

Nice, glad you got it fixed.