Stoked in Tobacco Country

[JB2133]

Greetings!

Heading down to Booneville, MS on the 18th to pickup this beaut (2024 MAHINDRA ROXOR HD ALL-WEATHER For Sale in Booneville, Mississippi)

Found Murphy Bros. on my endless search of Roxor YouTube content and really liked that they offered dressed up units for fair prices. Once I talked to Chris I was sold (just had decide between the two open station and cab version they have). I guess the OD Green was a limited run and no longer availabeJust have to add a turn signal kit and will be able to tag it here in TN. I’m interested to dive into all the forums to see everyone’s buildouts - not too much on YT for the Cab version yet. This is going to be primarily for flat ground transportation, mild off-roading, and debris cleanup. Definitely interested in functional accessories/upgrades, but not looking to dive into anything performance wise that is going to jeopardize warranty. Happy to be here!

 

[lost1wing]

Greetings!

Heading down to Booneville, MS on the 18th to pickup this beaut (2024 MAHINDRA ROXOR HD ALL-WEATHER For Sale in Booneville, Mississippi)

Found Murphy Bros. on my endless search of Roxor YouTube content and really liked that they offered dressed up units for fair prices. Once I talked to Chris I was sold (just had decide between the two open station and cab version they have). I guess the OD Green was a limited run and no longer availabeJust have to add a turn signal kit and will be able to tag it here in TN. I’m interested to dive into all the forums to see everyone’s buildouts - not too much on YT for the Cab version yet. This is going to be primarily for flat ground transportation, mild off-roading, and debris cleanup. Definitely interested in functional accessories/upgrades, but not looking to dive into anything performance wise that is going to jeopardize warranty. Happy to be here!

View attachment 14258 View attachment 14259

Welcome to the club!

 

[SteveinUT]

Very nice! Welcome!

 

[Roxasuras]

Yes welcome, this is a great place for knowledge and know how.

 

[Bob R1]

That is a nice looking Roxor.
The Front End is set up pretty well. Stubby Bumper, Winch, Cecco Shackle Mounts, Bow Shackles,
Tires and a Spring Lift.
No View of the Back End to see if it has a Cecco Farm Bumper. Which I consider a must have addition.

I would add the OEM Side Steps from Diesel Freak.
I wired my own Turn Signals using a Truck Lite Switch. I put 2" lights in the grill, and .75" Lights in the Fender Lip on the side.
I am sure that you will like the heater.

Keep posting. We could use some additional active owners.

Bob R

 

[JB2133]

That is a nice looking Roxor.
The Front End is set up pretty well. Stubby Bumper, Winch, Cecco Shackle Mounts, Bow Shackles,
Tires and a Spring Lift.
No View of the Back End to see if it has a Cecco Farm Bumper. Which I consider a must have addition.

I would add the OEM Side Steps from Diesel Freak.
I wired my own Turn Signals using a Truck Lite Switch. I put 2" lights in the grill, and .75" Lights in the Fender Lip on the side.
I am sure that you will like the heater.

Keep posting. We could use some additional active owners.

Bob R

I see you have a long history of posts - do you have a specific link to a summary on the turn signal package you ended up with? I am interested to know how you like it because it seems like you wanted an alternative to the $400 XTC which is the one I was leaning towards.

As for the back end, it has a bolt on pintle. I do like the look of the Cecco - should I consider the required drilling non-consequential? Any other must have upgrades or accessories I should add to my list?

Thanks!

John

 

[Gabe]

Looks good to go for now!

 

[Bob R1]

Cecco Farm Bumper:
Drilling the frame is not a big deal at all. The Bumper Hardware comes with a piece to use as a guide drilling the Holes. On the Right side I had to unbolt the Tail Pipe Hanger to drop the tail pipe down out of the way to drill the holes. You do need a couple Metric Taps to clean out the factory Nuts on the rear cross member. I believe the Instructions tell you the correct Tap Sizes. I work at the local Mom & Pop Hardware Store. We had both Taps in stock.
Bolting the Cecco Farm Bumper to the Frame is what sets it apart from other bumpers.

I will try and do a write-up on the Turn Signals when I get a minute.

Bob R

 

[Roxasuras]

Post a pic