Togo
Active member
How well do they fit and stay on the pedal.
As an Amazon Associate we earn from qualifying purchases.
ooooooooooo
Sent from my SM-A505U using Tapatalk
Rubber pedal pads
- Thread starter JMB3
- Start date
- Joined
- Mar 10, 2019
- Messages
- 2,296
- Points
- 113
- Location
- Hurricane, WV, USA
- Roxor #
- 2507
- Roxor Ownership
- Roxor Owner
I just put these on as well, they fit perfect.
- Joined
- Jun 13, 2019
- Messages
- 439
- Points
- 63
- Location
- Prescott, AZ, USA
- Roxor #
- 02776
- Roxor Ownership
- Roxor Owner
Any install secrets that made it easy??
- Joined
- Mar 10, 2019
- Messages
- 2,296
- Points
- 113
- Location
- Hurricane, WV, USA
- Roxor #
- 2507
- Roxor Ownership
- Roxor Owner
Honestly, it was super easy I slid the top on first and then gently pulled the bottom and slid it on as well took seconds and they are on solid, now we will see how they hold up.
- Joined
- Mar 10, 2019
- Messages
- 2,296
- Points
- 113
- Location
- Hurricane, WV, USA
- Roxor #
- 2507
- Roxor Ownership
- Roxor Owner
Whoever figured out Miata pedal cover would work perfect, great research!
- Joined
- Mar 10, 2019
- Messages
- 2,296
- Points
- 113
- Location
- Hurricane, WV, USA
- Roxor #
- 2507
- Roxor Ownership
- Roxor Owner
Not to worry, I am working on another video for an intercooler and grille combo, lol
- Joined
- Jun 13, 2019
- Messages
- 439
- Points
- 63
- Location
- Prescott, AZ, USA
- Roxor #
- 02776
- Roxor Ownership
- Roxor Owner
THANKS!
- Joined
- Jun 13, 2019
- Messages
- 439
- Points
- 63
- Location
- Prescott, AZ, USA
- Roxor #
- 02776
- Roxor Ownership
- Roxor Owner
Yep. Just put mine on. And yes, I would also like to thank the guy who figured out that the Mazda part would fit.???
B
Bister
Guest
These are the new ones I got from Mahindra. They are like $2. I guess we will see how they hold up. Seem to be a lot harder. Right now they are lasting awesome sitting in my shop.
I replaced my original rubber peddles with these ones a couple weeks ago. No issues noted so far.
Sent from my SM-A505U using Tapatalk
- Joined
- Oct 14, 2024
- Messages
- 148
- Points
- 43
- Location
- Southern Utah
- Roxor #
- 2604
- Roxor Ownership
- Roxor Owner
I'll bump this one up since it may help another guy. This worked awesome! Way easier to work with than those rock-hard OEM replacement ones! Easy install.
Longslyde
Active member
Just installed these today:
There are also ordered for a Miata, but full aluminum. Comes with the bolts. The throttle pedal needs to be formed to fit the acelerator pedal as the Miata pedal is not quite as rounded, but not too hard to bend with a rubber mallet. The brake and clutch pedals fit well also, just need to keep tightening the bolts on a circle to pull the pedal flat to the factory backer pedal.
There are also ordered for a Miata, but full aluminum. Comes with the bolts. The throttle pedal needs to be formed to fit the acelerator pedal as the Miata pedal is not quite as rounded, but not too hard to bend with a rubber mallet. The brake and clutch pedals fit well also, just need to keep tightening the bolts on a circle to pull the pedal flat to the factory backer pedal.
This was a good post to revive. Nice to have some Mazda options that are better than factory replacements.
Bob R
Bob R