Leslie
Member
I installed the RoxPower fuse box and you are supposed to be able to get both key only and always on power. I cannot get keyed only to work. Anyone have experience with the RoxPower setup?
ooooooooooo
RoxPower
- Thread starter Leslie
- Start date
Leslie
Member
Followed attached directions sent to me by Roxor customer service. Roxor accessories such as their Rockford audio upgrade just plug into the Roxpower while I am attempting to wire in my own accessories. Bought the Molex adapter and pins and plug mine in and accessories are always hot.
Leslie
Member
That could be my problem as I did not install the retro harness as I thought it was not needed. I will be back at the hunting lease after Thanksgiving and give this a shot and let you know if it work. Thanks!
- Joined
- Jun 27, 2020
- Messages
- 22
- Points
- 3
- Location
- Fort St. John, BC, Canada
- Roxor #
- 4655
- Roxor Ownership
- Roxor Owner
This may be a stupid question but what type of molex do you use for the Roxpower plugs? I've got my Roxpower installed, but don't know what molex to buy for the plugs.
Leslie
Member
eBay. Search Harely Molex 6 pin (count pins to confirm). The crimp on connectors can also be found at DigiKey for larger gauge wire and also as pre crimped pigtails. To crimp yourself you need a special molex crisper.
- Joined
- Jun 27, 2020
- Messages
- 22
- Points
- 3
- Location
- Fort St. John, BC, Canada
- Roxor #
- 4655
- Roxor Ownership
- Roxor Owner
Thanks Leslie. I have ordered a crimper, but when I was ordering the molex connectors there was several types to choose from. I am not sure what size/style to choose.
Leslie
Member
Molex MX150 is connector type. Let me know if you get power to work with key off as I still need to find out what I did wrong.