- Joined
- Mar 17, 2019
- Messages
- 101
- Points
- 28
- Location
- Northwest USA
- Roxor Ownership
- Roxor Owner
- Roxor #
- 3535
The isolators are glad hand seals used on tractor trailer air lines. The center holes were a little oversized and were shimmed with 3/8" fuel line hose.
The firewall end of the rods were fitted with a zinc coated washers on the bottom of the bracket and a larger washer on the top side.
The zinc color matched the intake tube and the red isolators went with the oil pan skid plate as well as other red items in the engine bay.
The entire job too less than a half hour and total parts was about eleven bucks.
Would like to isolate the radiator with rubber in the future. Should help it last and modern vehicles are fitted in this manner.
Last edited: