Need a rear bumper with receiver

[DEKirk2]

I pull a small 4X8 trailer out to feed the horses I would order the Roxor one but the after markets look nicer

 

[txroadkill]

Imo the roxor one is the best as it actually ties into the frame.

 

[Woodsman74881]

Oem is far superior to any. Other than on the Rox bumper with hitch and a couple of people who have fabricated some of high quality.

 

[DLR]

The On the Rox bumper ties into the existing "bumper" all across its length. It seems to be pretty strong and the load is spread out quite a bit. And the 2 inch receiver hitch gives you options, vs. only having a pintle hitch in one Roxor version.

 

[Gavinras]

I pull a small 4X8 trailer out to feed the horses I would order the Roxor one but the after markets look nicer

80 dollars +shipping?

 

[Grump Fish]

I pull a small 4X8 trailer out to feed the horses I would order the Roxor one but the after markets look nicer

This is what I did. Took a little modification but it looks good and should be as strong as the OEM option.
Heres a Link to the install writeup.
Smittybilt SRC Classic Rear Bumper - Team ROXOR Forum - Unofficial Mahindra ROXOR Off-road Community!

 

[Paulson]

Cecco racing utility bumper. Ties into the frame. I pull my water trailer with mine.

 

[Tonopah]

I have the Cecco rear "farm" bumper with the tire carrier and it works well. The bumper does tie into the frame.

 

[Haerterich]

All the stuff from CECCO is well built. I have all three of his skids plates and can say they are a must off serious off road. And the fuel tank skid plate is really nice, raises the tank one inch. For a rear hitch, one that attaches to the frame will have the most strength, and yess CECCO makes two types. However money is always a factor. For a lower cost but high strength the "EMP 2 inch receiver hitch" gets the job done. I went this way until i can afford the CECCO tube hitch. With the EMP i have used it several times to tie the rear to a tree and pull other people out. One time i pulled out a full size Ford out of the mud. No bending or damage to the rear of my Roxor. However i did add four bolts, the second picture shows them from the back side of the stock bumper.

 

[Steve243]

Can’t go wrong with CECCO bumper. I’ve got one and love it. I had a question so I sent an e-mail and the owner called me within 5 minutes, and it was a Saturday. Great product and customer service.


Sent from my iPad using Tapatalk