How to Install Aftermarket LED Lights on a Roxor

[criss_mj]

Hello Team Roxor

I’m looking to upgrade my Roxor with aftermarket LED lights and could use some guidance on the installation process. Specifically:

Mounting Tips: What are the best practices for mounting LED lights on a Roxor to ensure they are secure and effective?
Wiring Guidance: How should I wire the LED lights to integrate with the existing electrical system? Are there any specific connectors or relays needed?
Legal Considerations: Are there any legal considerations or regulations I should be aware of when installing additional lights?
I also check this: https://teamroxor.com/threads/how-to-egr-delete-2019-roxor-with-onrubyly-block-off-plates.2025/ But I have not found any solution.

Any advice, tutorials, or tips you can share would be greatly appreciated. Thanks for your help!

Best Regards

 

[OffRoad709]

Not sure if that's what you are looking for ?

 

[Bob R1]

LED Headlights, or a LED Light Bar, or LED Turn Signals, LED Rock Lights?? We need more details.
From the way that you worded it, I would think you are talking about a light bar.
Considerations:
Do you have a Top and Windshield?? What Kind??
How Long is the Light Bar you plan to use??
Do you plan to mount it to a Roll Bar or the Roof, or the Cowl, or the Front Bumper??
Some of the Roxor's come pre wired for a Front Roll Bar Mounted Light Bar. They need a Roxor Light Bar Switch (1803 AUA 00041 N), as well as the Light Bar Wiring Harness (S 1801 CUA 00031 N). You have the Factory Light Bar Plug and Wiring pre installed that terminates under the Right side of the dash on the 2023 and 2024 Machines, and possibly others. The Light Bar Harness connects at that point and goes up the ROPES.
No telling what is illegal where you live. You should probably check with the local LE who will be the ones bothering you. Normally Light Bars are not legal to use on highways.

Bob R

 

[darcie.eves]

Hello Team Roxor

I’m looking to upgrade my Roxor with aftermarket LED lights and could use some guidance on the installation process. Specifically:

Mounting Tips: What are the best practices for mounting LED lights on a Roxor to ensure they are secure and effective?
Wiring Guidance: How should I wire the LED lights to integrate with the existing electrical system? Are there any specific connectors or relays needed?
Legal Considerations: Are there any legal considerations or regulations I should be aware of when installing additional lights?
I also check this: https://teamroxor.com/threads/how-to-egr-delete-2019-roxor-with-onrubyly-block-off-plates.2025/ But I have not found any solution.

Any advice, tutorials, or tips you can share would be greatly appreciated. Thanks for your help!

Best Regards

Hi there,


Great upgrade idea! Here's a quick guide:

• Mounting: Use A-pillar or bumper mounts; ensure lights are aimed below the horizon and mounted with anti-vibration hardware.
• Wiring: Use a relay harness with inline fuse, weatherproof connectors (e.g., Deutsch), and tap into a switched power source.
• Legal: Check local laws—off-road lights often need to be off or covered on public roads; DOT-approved options are safest.
  

  Hello Team Roxor
  
  I’m looking to upgrade my Roxor with aftermarket LED lights and could use some guidance on the installation process. Specifically:
  
  Mounting Tips: What are the best practices for mounting LED lights on a Roxor to ensure they are secure and effective?
  Wiring Guidance: How should I wire the LED lights to integrate with the existing electrical system? Are there any specific connectors or relays needed?
  Legal Considerations: Are there any legal considerations or regulations I should be aware of when installing additional lights?
  I also check this: https://teamroxor.com/threads/how-to-egr-delete-2019-roxor-with-onrubyly-block-off-plates.2025/ But I have not found any solution.
  
  Any advice, tutorials, or tips you can share would be greatly appreciated. Thanks for your help!
  
  Best Regards

 

[darcie.eves]

Upgrading your Roxor with LED lights is a great choice! Here’s a quick guide to help you with the installation:

1. Mounting Tips:
   • Use heavy-duty brackets or mounting kits designed for off-road vehicles to ensure a secure fit.
   • Make sure the lights are mounted at a proper height to avoid glare and ensure optimal visibility.
2. Wiring Guidance:
   • Use relays to avoid overloading your electrical system. A relay kit will allow you to control the lights without drawing too much current from the main wiring.
   • Make sure to use weatherproof connectors and ensure all wiring is securely insulated to prevent short circuits.
   • Consider running the wires through grommets to protect them from abrasion and the elements.
3. Legal Considerations:
   • Check your local laws regarding the brightness and placement of auxiliary lights, as regulations vary by region.
   • Some areas may have restrictions on the use of certain lights on public roads, so it's best to verify what's allowed.

 

[darcie.eves]

Hey! 👋 Here’s a short guide for installing aftermarket LED lights on your Roxor:

---

🔧 Mounting Tips​

• Use heavy-duty brackets or A-pillar mounts for stability.
• Seal holes with silicone to prevent rust.
• Aim lights properly to avoid glare.

---

🔌 Wiring Guidance​

• Use a relay harness with an inline fuse.
• Tap into the battery or accessory line—not directly into factory wires.
• Use weatherproof connectors (like Deutsch plugs).

---

⚖️ Legal Considerations​

• Follow local laws on brightness, color (usually white/amber front, red rear), and use on-road vs off-road.
• Avoid blinding angles or strobe modes on public roads.

---

Let me know if you want a wiring diagram or parts list! 💡🛠️

Hello Team Roxor

I’m looking to upgrade my Roxor with aftermarket LED lights and could use some guidance on the installation process. Specifically:

Mounting Tips: What are the best practices for mounting LED lights on a Roxor to ensure they are secure and effective?
Wiring Guidance: How should I wire the LED lights to integrate with the existing electrical system? Are there any specific connectors or relays needed?
Legal Considerations: Are there any legal considerations or regulations I should be aware of when installing additional lights?
I also check this: https://teamroxor.com/threads/how-to-egr-delete-2019-roxor-with-onrubyly-block-off-plates.2025/ But I have not found any solution.

Any advice, tutorials, or tips you can share would be greatly appreciated. Thanks for your help!

Best Regards