Has anyone tried CJ7 doors on Roxor with CJ7 windshield? If it works, CJ7 hardtop may also work, as well as CJ8 half cab.
ZERO mods for a 76 -86 CJ7 windshield
76-86 CJ Windshield - Kept factory roll cage - shimmed out windshield with 2" square tubing - fits perfect.
View attachment 1512View attachment 1513
Each mount consists of two pieces of 2" square tubing cut to match the shape of the bracket and are welded together. The side holes go through just the one wall of tubing and the front holes are drilled all the way through both sides of tubing. I used the factory bolts for attaching the bracket to the Roxor and used the windshield screws with nuts for attaching the bracket to the tubing. However I may change to using a longer bolt and run it all the way through the bracket/tubing to the Roxor in the future.
To help with air movement I have since attached the cowl seal to the bottom of the window frame and it seals against the Mahindra Cowl eliminating any gap in the bottom.