jerry c
New member
Should my Roxor have come with working break lights?
ooooooooooo
Thanks.
Sent from my SM-G955U using Tapatalk
www.quadratec.com
break lights
- Thread starter jerry c
- Start date
Sonnyd
Active member
Mine worked from the factory, definitely.
Last edited by a moderator:
JMB3
New member
The brake lights work when the ignition is switched on. They continue to work for about 10 seconds after the ignition is switched off. Then they don't work any more.
If by chance it is not triggering, the switch is located down by the peddle. There should be an adjustment screw.
jerry c
New member
It is fixed now. I found the switch was not plugged in. I hooked it up and all is good. Thanks for the help.
Great. Was it the one at the foot peddle disconnected?It is fixed now. I found the switch was not plugged in. I hooked it up and all is good. Thanks for the help.
Thanks.
Sent from my SM-G955U using Tapatalk
jerry c
New member
Yes it was tucked up out of view over the other wires.
foxstand
New member
Yes. Check the wiring harness. There have been several comments about loose wires.
txroadkill
Well-known member
- Joined
- Oct 28, 2018
- Messages
- 1,287
- Points
- 113
- Location
- Texas
- Roxor Ownership
- Roxor Owner
- Roxor #
- 2498
Rock Hard 4X4 RH4006 License Plate Relocation Bracket with ORO PlateLITE for 76-18 Jeep CJ and Wrangler YJ, TJ & JK
Move your license plate away from it's vulnerable OEM location! Your spare tire is safely hidden away behind your Jeep and clear from debris and damage. Let's move your license plate up to the same safe haven.
