Latest activity

Normally you will need to use a Pull Knob automotive switch, along with a 5 Pin Relay for Park to work. I have my Jeep YJ wiper motor...

Here is a basic 4 wire motor. You would need to verify which wire is which though. My motors are Sprague and yours could be a different...

is there any upgrades to the 2018 gauges yet? tablets? diesel freaks hasn't anything yet, as of now is there a conversation of the old...

hi, I have a roxor wiper motor , its single speed , 4 wires red/black/yellow/blue , can any one tell how to wire it up? the red and...

When riding narrow trails, it get mighty dark with only forward lights. The two corner lights give you enough light to get out of the...

I wasn't able to find the repair manual anywhere online. So I emailed the factory and they gave me the link to the e version. I know...

Start with a set of OEM Side Steps from Diesel Freak. Then she can get in. Next the 235/85R16 M&S 10 ply Tires. I have the Thunderer...

Bob R1 enlightened me on this. Loosen this bolt head, then loosen the nut by the hub. Turn the bolt in or out(I don’t remember which way...

I suggest crawling underneath and searching, or take it back to the dealer and let them do it for you. You're not going to find any...

Thank you very much for the replies.

Start with a set of OEM Side Steps from Diesel Freak. Then she can get in. Next the 235/85R16 M&S 10 ply Tires. I have the Thunderer...

The factory 2024's have pretty stiff springs. It might even ride smoother with a full hard cab. Bob R

I need to get Rocky out in the dark and see just how well the light bar works. I am 100% sure that it will be way more impressive than...

I ended up with a 20 inch light bar and 2 spot light led's. Thanks for the tip on opening the hood. My wiring was completed some time...

FOLLOW UP First I mounted the Harbor Freight Road Shock 42" Light Bar on the nose of the Fortress Roof. I used the Bolts Provided in...