Need help! 12 volt port on dash doesn’t work!

InfRoxor

Member
Joined
Apr 15, 2023
Messages
42
Points
8
Location
New York
Roxor Ownership
Roxor Owner
Roxor #
09057
Hi fellow Roxor enthusiast! My 12 volt port on dash doesn’t work. I have XTC turn signal kit and trailer wire. It works great. I’ve checked the following;
1. Main Fuse box under hood.
2. Passenger dash fuse box.
3. Drivers side dash fuse box.

I found;
1. 1 fuse was out under the drivers dash.
2. Main fuse box had 1 fuse out and 4 extra fuses that showed no power going to them. The schematic shows no fuses in those slots. I replaced all 4 extra fuses and tested and no power was going to them so I pulled them.

Thank you for any fixes you may know of.
 

DrunkenSlug

Member
Lifetime Member
Joined
May 10, 2025
Messages
81
Points
18
Location
NC
Roxor Ownership
Roxor Owner
Hi fellow Roxor enthusiast! My 12 volt port on dash doesn’t work. I have XTC turn signal kit and trailer wire. It works great. I’ve checked the following;
1. Main Fuse box under hood.
2. Passenger dash fuse box.
3. Drivers side dash fuse box.

I found;
1. 1 fuse was out under the drivers dash.
2. Main fuse box had 1 fuse out and 4 extra fuses that showed no power going to them. The schematic shows no fuses in those slots. I replaced all 4 extra fuses and tested and no power was going to them so I pulled them.

Thank you for any fixes you may know of.
Hey dude, kind of dumb but I had something similar happen after having my dash apart. If you follow the red wire back from the 12v (back side of dash), you'll find a (I assume thats what it was, mine disintegrated) fuse holder. Pretty sure it's already a fused connection, no idea why it was there. Mines a '25 for reference, your mileage might vary. Fix was simple after finding that, just reattach the wires.
 
Top