Skymarc
Member
- Joined
- Oct 28, 2018
- Messages
- 93
- Points
- 18
- Location
- Ottawa, ON, Canada
- Roxor #
- 2223
- Roxor Ownership
- Roxor Owner
ooooooooooo
Would having the hubs be OK if you just leave them engaged? Anyone with lockers almost always have hubs also.
Anyone install tracks on the Roxor?
- Thread starter Skymarc
- Start date
B
Bister
Guest
I looked a them, to pricy for me, but I said the same thing when I bought tracks for my Grizzly. It's my go anywhere machine. and groomer/drag puller.
The track system from Roxor says that you can't have lockers in the front, I have lunchbox but probably the OX would be OK, just don't engage it; so that would put me out of the market. But it's not something I really need around here anyway, but they would be awesome to use it as a groomer or in a snow resort, etc.
The track system from Roxor says that you can't have lockers in the front, I have lunchbox but probably the OX would be OK, just don't engage it; so that would put me out of the market. But it's not something I really need around here anyway, but they would be awesome to use it as a groomer or in a snow resort, etc.
Skymarc
Member
- Joined
- Oct 28, 2018
- Messages
- 93
- Points
- 18
- Location
- Ottawa, ON, Canada
- Roxor #
- 2223
- Roxor Ownership
- Roxor Owner
The Nordtrack you cannot have Warn unlocking hubs but lockers are fine.
Just about 1/2 price of the OEM Mattracks.
Just about 1/2 price of the OEM Mattracks.
B
Bister
Guest
Would having the hubs be OK if you just leave them engaged? Anyone with lockers almost always have hubs also.
Skymarc
Member
- Joined
- Oct 28, 2018
- Messages
- 93
- Points
- 18
- Location
- Ottawa, ON, Canada
- Roxor #
- 2223
- Roxor Ownership
- Roxor Owner
You need to remove them to fit the 3" wheel spacers. I bought a set of Warn but wont install them as I may go with these tracks.
Skymarc
Member
- Joined
- Oct 28, 2018
- Messages
- 93
- Points
- 18
- Location
- Ottawa, ON, Canada
- Roxor #
- 2223
- Roxor Ownership
- Roxor Owner
Check the install manual.
B
Bister
Guest
Ok, thanks, that makes sense now. And if you have tracks on you are going to be in 4x4 all the time anyway.
Skymarc
Member
- Joined
- Oct 28, 2018
- Messages
- 93
- Points
- 18
- Location
- Ottawa, ON, Canada
- Roxor #
- 2223
- Roxor Ownership
- Roxor Owner
I bought a set of the Nordtrack, should have them in November and will install around December.
Bought the 121" for the front and 136" on the back for better flotation.
Bought the 121" for the front and 136" on the back for better flotation.
B
Bister
Guest
In Saskatchewan, the little bit of snow we got where I am is pretty much melted. Harvest sucks for the farmers, maybe half off and it’s wet.
Skymarc
Member
- Joined
- Oct 28, 2018
- Messages
- 93
- Points
- 18
- Location
- Ottawa, ON, Canada
- Roxor #
- 2223
- Roxor Ownership
- Roxor Owner
No snow yet, let us finish harvesting the crops then we will play with the tracks.
Skymarc
Member
- Joined
- Oct 28, 2018
- Messages
- 93
- Points
- 18
- Location
- Ottawa, ON, Canada
- Roxor #
- 2223
- Roxor Ownership
- Roxor Owner
Just got them installed and waiting on more snow.
Skymarc
Member
- Joined
- Oct 28, 2018
- Messages
- 93
- Points
- 18
- Location
- Ottawa, ON, Canada
- Roxor #
- 2223
- Roxor Ownership
- Roxor Owner
So we got more snow and got to ride yesterday. The snow was wet as it was around 0 degC and I could only get to 3rd gear.
Today was colder at -6C and I had no problem running in 4th gear. Speedometer was showing over 50 mph but I got suspicious and ran a gps app on my phone and it was showing 28-30 mph in 4th gear @2000 rpm. The highest I got was 33 mph. It was a lot smoother riding today with the colder temps and harder snow.
Today was colder at -6C and I had no problem running in 4th gear. Speedometer was showing over 50 mph but I got suspicious and ran a gps app on my phone and it was showing 28-30 mph in 4th gear @2000 rpm. The highest I got was 33 mph. It was a lot smoother riding today with the colder temps and harder snow.
Similar threads
