Gangster lean

[Sasquatch]

Got a 1/2 inch lean on the drivers side, anybody know where to start looking? Tires are good.

 

[Roxasuras]

Shocks/ leaf springs?

 

[Roxasuras]

If it were my roxor the answer would be too much pasta, lol

 

[Sasquatch]

If it were my roxor the answer would be too much pasta, lol

😂

 

[Roxasuras]

On a serious note the stock shocks are useless

 

[Sasquatch]

I’ve got bilsteins and rxr performance springs, guess I’ll be crawling under.

 

[Samyguy]

Jumping it too high !!

 

[Roxasuras]

Duke's style

 

[txroadkill]

Start with Indian manufacturing tolerances and quality control.

 

[Hummingbird Ranch]

Look for cracks in your longitudinal frame rails, in and around spring mounts, both front and rear, both sides and above the axles. Hopefully you will not find any, but I saw a you tube video of a guy rebuilding a Roxor from the ground up, and had one rear corner lower than the other, and thought it was a weak spring pack, so he swapped springs from side to side and same corner remained low, which ruled out the weak spring theory. He continued looking and found cracked frame over the rear axle on the low side.