ooooooooooo

FRAME RUST PREVENTION

Gypsyjon

New member
Joined
May 10, 2020
Messages
18
Points
3
Location
Eastpoint, FL, USA
In the Roxor manual they suggest if you live in an area with salt air, like me right on Gulf of Mexico, that you spray the frame with anticorrosion stuff to keep it from rusting.
Has anyone done this?
If so, what did you use and is it working?
Right now I am thinking about RustOleum Cold Galvanizing spray.

Would appreciate any thoughts
TIA
 
B

Bister

Guest
I think, not sure, but some folks use Fluid Film. Lots of stuff on Youtube.
 

echo3delta

Member
Joined
Apr 14, 2020
Messages
34
Points
18
Location
Great Bend, KS, USA
Roxor Ownership
Roxor Owner
Might look at hercliner or rustoleum rust stop. Or any rubberized undercoating

Sent from my LM-V405 using Tapatalk
 

PineCreek

Active member
Lifetime Member
Joined
Mar 29, 2020
Messages
150
Points
43
Location
Virginia
Roxor Ownership
Roxor Owner
Raptor Liner!!!
Seriously. The Best
 

Gabe

Active member
Joined
Jun 26, 2024
Messages
175
Points
28
Location
Louisiana
Roxor Ownership
Roxor Owner
Sprayed the undercariage of mine with fluid film.
 

USMC

Active member
Joined
Jul 1, 2024
Messages
194
Points
43
Location
Naples Florida
Roxor Ownership
Roxor Owner
Roxor #
09848
Try Eastwood Chemicals, they have been doing this for years.
 

Max A.

Well-known member
Joined
Nov 4, 2019
Messages
598
Points
93
Location
Baltimore, MD, USA
Roxor Ownership
Roxor Owner
Roxor #
00168
Oil or wax based is the best. Rubberized coatings and tends to trap moisture if it gets in and it also makes it a pain to work on later. I hate buring the stuff off when i have to do rust repairs for people.
 

Roxasuras

Well-known member
Lifetime Member
Joined
Mar 10, 2019
Messages
2,257
Points
113
Location
Hurricane, WV, USA
Roxor Ownership
Roxor Owner
Roxor #
2507
I try to clean the undercarriage with a undercarriage pressure wand first, so you are lubricating/spraying a clean surface.
 

CTD03

New member
Joined
Apr 7, 2025
Messages
2
Points
3
Location
Western Pa
Roxor Ownership
Looking to buy
I undercoat on the side and I will tell you any lanolin based product will work. I used pfc,fluild-film,pb blaster makes some good stuff also just expensive. I would not do any hard coating that seal the frame. Wash,wash,wash is the best thing and dry it. they make a salt neutralizer that works great.

any questions on undercoating feel free to ask.
 
Top